TM-9-2350-277-20-3
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6
TM-9-2350-277-20-3 - Page 83 of 941
TM 9-2350-277-20-3
REPLACE AUXILIARY POWER (SLAVE) RECEPTACLE (M113A3, M1059A3,
REPLACE AUXILIARY POWER (SLAVE) RECEPTACLE (M113A3,
M1064A3, AND M58 ONLY) — Continued
0263 00
INSTALLATION
NOTE
Make sure protective cap retaining cord is attached to receptacle lower mount screw.
1.
Install receptacle (1) in master switch panel (2). Secure with four screws (3), washers (4), and new locknuts (5).
2.
Install ground strap (6) on negative post (7) of receptacle (1). Secure with screw (8) and lockwasher (9).
3.
Install circuit 50 lead (10) on positive post (11) of receptacle (1). Secure with screw (12) and lockwasher (13).
4.
Install master switch panel (2) on distribution box. Secure with eight screws (14), washers (15), and new locknuts (16).
5.
Connect circuit 37 lead (17) to connector (18).
FOLLOW-THROUGH STEPS
1.
Install warning light panel assembly (WP 0291 00).
2.
Connect battery ground strap (WP 0337 00).
END OF TASK
0263 00-2
Change 2
Back to Top
