TM-9-2350-277-20-3
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6
TM-9-2350-277-20-3 - Page 86 of 941
TM 9-2350-277-20-3
REPLACE NATO AUXILIARY POWER (SLAVE) RECEPTACLE (M577A3 AND M1068A3
ONLY) — Continued
0264 00
INSTALLATION
1.
Install insulator bushing (1) in hull.
2.
Install receptacle (2), new gasket (3), insulator (4), adapter (5), and new gasket (6).
3.
Connect circuit 6 lead (7) to positive terminal of receptacle (2) with new lockwasher (8) and screw (9).
4.
Connect circuit 50 lead (10) to negative terminal of receptacle (2) with new lockwasher (11) and screw (12).
5.
Position new gasket (6) and adapter (5) on hull and secure with four screws (13), new lockwashers (14), and
washers (15).
6.
Align receptacle (2), new gasket (3), and insulator (4) with adapter (5). Install four screws (16), new lockwashers (17),
and washers (18).
7.
Place circuit 50 lead (10) and clamp (19) on hull weldnut. Secure with washer (20) and screw (21).
8.
Position harness protector (22) and secure with seven screws (23) new lockwashers (24), and washers (25).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0338 00).
END OF TASK
0264 00-3/4 blank
Change 2
Back to Top
