TM 9-2350-277-20-4
REPLACE DRIVER’S HATCH COVER AND EXTERIOR LOCK - Continued
0531 00
1.
Remove two locknuts (1), screws (2), and retainer (3) from hinge brackets. Discard locknuts.
2.
Support cover (4). Remove springs (5), shield (6), two fiber washers (7), and cover from hinge brackets.
3.
Remove locknut (8) and screw (9) from cover (4). Discard locknut.
4.
Pry up end of seal (10) and remove from cover (4). Discard seal.
0531 00-2
Change 2