TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

TM-9-2350-277-20-4 - Page 476 of 861

TM 9-2350-277-20-4

REPLACE DRIVER’S HATCH HOLD-OPEN HOOK AND BUMPER (M113A3,

M1059A3, M1064A3, AND M58 ONLY)

0532 00

THIS WORK PACKAGE COVERS:

Removal (page 0532 00-1).

Installation (page 0532 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit WP 0926 00, Item 65

Materials/Parts

Locknut

Locknut (2)

Personnel Required

Unit Mechanic

References

See your -10

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

REMOVAL

1.

Open both ends of S-hook (1). Remove S-hook from chain (2) and hull bracket (3).

2.

Remove tube (4) from chain (2).

3.

Open both ends of S-hook (5). Remove S-hook from chain (2) and safety pin (6). Remove safety pin from hull bracket.

4.

Remove two screws (7), four washers (8), two locknuts (9), and block (10) from hull bracket (3). Discard locknuts.

0532 00-1