TM-9-2350-277-20-5
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6
TM-9-2350-277-20-5 - Page 490 of 1047
TM 9-2350-277-20-5
INSTALL ARMOR KIT (M113A3 ONLY)
0748 00
THIS WORK PACKAGE COVERS:
Installation (page 0748 00-1).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926, Item 65
Torque Wrench Adapter (WP 0926 00, Item 4)
Torque Wrench (WP 0926 00, Item 85)
Lifting device rated at 200 lb (91 kg) minimum
Materials/Parts
Sealing compound (WP 0928 00, Item 51)
Personnel Required
Unit Mechanic
Helper (H)
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Track
cover removed (WP 0438 00)
Smoke grenade launchers removed (WP 0455 00)
Trim vane lowered (see your -10)
INSTALLATION
WARNING
Armor plates are heavy and can cause injury or death. Support armor plate properly to avoid
injury.
NOTE
There are two armor kits, 57K0429 and 57K0467. Steps apply to both kits unless otherwise
noted.
Make sure armor plate mounting holes in hull are clean.
Some armor plates in this task weigh over 130 lb. Use lifting device and helper to support and
position armor.
0748 00-1
Change 3
Back to Top
