TM-9-2350-277-20-5

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6

TM-9-2350-277-20-5 - Page 935 of 1047

TM 9-2350-277-20-5

REPLACE ALTERNATE LOCATION GUNNER’S DISPLAY BLOCK — Continued

0812 15

INSTALLATION

1.

Position gunner’s display block over helicoil inserts so that the angle face is outward and short edge is on the ramp side.

2.

Install four socket head screws (1) through the gunner’s display block (2) and tighten.

FOLLOW-THROUGH STEPS

1.

Install gunner’s display. See TM 9-1220-248-10.

2.

Start engine (see your -10).

3.

Raise and lock ramp (see your -10).

4.

Stop engine (see your -10).

END OF TASK

0812 15-2

Change 4