TM-9-2350-277-20-5

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6

TM-9-2350-277-20-5 - Page 928 of 1047

TM 9-2350-277-20-5

REPAIR/REPLACE MORTAR FIRE CONTROL SYSTEM CABLES (MFCS)

(M1064A3 ONLY) — Continued

0812 14

52. Install two loop clamps (WP 0928 00, Item 14.2) to support cable at points at right edge of driver’s compartment and

left wall of driver’s compartment.

CAUTION

To prevent damage to equipment, ensure power is turned off at power distribution assembly

(PDA) before connection of cable.

NOTE

Steps 53 - 54 apply to cable 34W7, power adapter cable for PLGR.

53. Connect cable 34W7 (33) to J4 connector (32) on PLGR (31).

54. Connect cable 34W7 (33) to P4 connector on cable 3W7 (27).

0812 14-27

Change 5