TM-9-2350-277-20-5

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6

TM-9-2350-277-20-5 - Page 918 of 1047

TM 9-2350-277-20-5

REPAIR/REPLACE MORTAR FIRE CONTROL SYSTEM CABLES (MFCS)

(M1064A3 ONLY) — Continued

0812 14

16. Position cable 3W3 (29) in turntable well with P4 branch facing rear of vehicle. Route P4 connector through sleeve (47)

in turntable wall. Extend cable 3W3 approximately 5.5 ft. (1.68 m).

17. Carefully install two halves of cable clamp (46) around cable 3W3 (29) and push into sleeve (47) in turntable wall.

Tighten four capscrews (48).

18. Install loop clamp (44), flat washer (43), and socket head capscrew (42) to secure P3 branch of cable 3W3 (29) to

tapped hole (61).

19. Install loop clamp (44), flat washer (43), and socket head capscrew (42) to secure P1/P2 branch of cable 3W3 (29) to

tapped hole (62).

0812 14-17

Change 5