TM-9-2350-277-20-5

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6

TM-9-2350-277-20-5 - Page 909 of 1047

TM 9-2350-277-20-5

REPAIR/REPLACE MORTAR FIRE CONTROL SYSTEM CABLES (MFCS)

(M1064A3 ONLY) — Continued

0812 14

CAUTION

To prevent damage to equipment, ensure power is turned off at power distribution assembly

(PDA) before disconnection of cable.

NOTE

Steps 23 - 36 apply to cable 3W3, power/data cable for pointing device (PD) and gunner’s

display (GD).

23. Disconnect P1 connector of cable 3W3 (29) from J1 connector (36) on pointing device (PD) (37).

24. Disconnect P2 connector of cable 3W3 (29) from J2 connector (38) on PD (37).

25. Disconnect P3 connector of cable 3W3 (29) from J1 connector (35) on gunner’s display (GD) (34).

26. Lift and secure two gunner’s side turntable access covers (39). Refer to TM 9-1015-232-23&P.

27. Remove bilge pump floor plate (40) (WP 0543 00) and fuel valve panel (41) (WP 0197 00).

0812 14-8

Change 5