TM-9-2350-277-20-6

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6

TM-9-2350-277-20-6 - Page 251 of 487

TM 9-2350-277-20-6

REPLACE DVE SENSOR SET ASSEMBLY POWER CABLE — Continued

0866 01

INSTALLATION

1.

Install power cable (2) connector P1 into jack on sensor set assembly (3).

2.

Secure power cable (2) to sensor set assembly (3) with two screws (1).

FOLLOW-THROUGH STEPS

1.

Install sensor set assembly in driver’s hatch and operate DVE. See TM 9-2350-277-10.

2.

After operation remove and stow. See TM 9-2350-277-10.

END OF TASK

0866 01-2

Change 5