REPLACE DRIVER’S DISPLAY MOUNTING BRACKET (DVE) — Continued
7.
If commander’s display (M58 only) is not installed in vehicle, install connector W2P2 (4) to connector A1J2 (5) and
connector 516B P2 (3) to connector A1J1 (2) on driver’s display (1).
8.
Position three pads (3) on bulkhead and guide (2) with three clamps (4), new lockwashers (5), and screws (6).
.
0866 02-8
Change 5
TM 9-2350-277-20-6
0866 02