TM-9-2350-277-20-6

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6

TM-9-2350-277-20-6 - Page 264 of 487

TM 9-2350-277-20-6

REPLACE AN/VAS-5 DRIVER’S VISION ENHANCER STOWAGE BRACKET — Continued

0866 03

INSTALLATION

NOTE

For DVE storage bracket (M58 only) (old configuration), do steps Steps 1 - 3.

For DVE storage bracket (new configuration), go to steps Steps 4 - 6.

1.

If pad (1) was removed, clean mating surface using cleaning compound solvent and wiping rag. Cement new pad to

driver’s compartment wall with adhesive.

2.

Install stowage bracket (2), retainer (4), four washers (5), and screws (6) on support (3).

3.

If removed, install new strap (7) on two loops (8).

4.

If pad (1) was removed, clean mating surface using cleaning compound solvent and wiping rag. Cement new pad to

driver’s compartment wall with adhesive.

5.

Install storage bracket (9), four washers (10), lockwashers (11), and four screws (12), on bulkhead.

6.

If removed, install new strap (7) on two loops (8).

END OF TASK

0866 03-3/4 blank

Change 5