TM-9-2350-277-20-6

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6

TM-9-2350-277-20-6 - Page 266 of 487

TM 9-2350-277-20-6

REPLACE DRIVER’S VISION ENHANCER (DVE) AN/VAS-5

POWER SUPPLY CABLE

0866 04

THIS WORK PACKAGE COVERS:

Removal (page 0866 04-1).

Installation (page 0866 04-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0926 00, Item 65)

Materials/Parts

Lockwasher

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped (TM 9-2350-277-10)

DVE switch off (TM 9-2350-277-10)

REMOVAL

NOTE

If the commander’s display (M58 only) with mounting bracket is not installed, power supply

cable connection to the DVE power switch is connected differently. This task covers both

configurations.

NOTE

To replace driver’s display power supply cable, do Steps 1 - 3.

To replace driver’s/commander’s display (M58 only) power supply cable, do Steps 4 - 6.

1.

Remove power supply cable connector 516B P2 (1) from driver’s display connector A1J1 (2).

2.

Remove screw (3), lockwasher (4), and power supply cable ground lead E3 (5) from bracket (8). Discard lockwasher

3.

If commander’s display (M58 only) is not installed, remove power supply cable connector 516B P1 (7) from DVE power

switch (6). Remove power supply cable from vehicle.

086604-1

Change 5