TM-9-2350-277-20-6

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6

TM-9-2350-277-20-6 - Page 270 of 487

TM 9-2350-277-20-6

REPLACE AN/VAS-5 DRIVER’S NIGHT VISION ENHANCER (DVE)

SENSOR SET ASSEMBLY ADAPTER

0866 05

THIS WORK PACKAGE COVERS:

Removal (page 0866 05-1).

Installation (page 0866 05-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0926 00, Item 65)

Torque wrench, 3/8 drive, 0-150 lb-in

(WP 0926 00, Item 79)

Materials/Parts

Technical petrolatum (WP 0928 00, Item 61)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped (TM 9-2350-277-10)

Carrier blocked (TM 9-2350-277-10)

Sensor set assembly removed from stowage

(TM 9-2350-277-10)

REMOVAL

1.

Remove two pads (1) from grooves around front adapter half (3) and back adapter half (7).

2.

Remove two screws (8) holding front adapter half (3) and back adapter half (7) together. Retain screws for installation.

3.

Pull front adapter half (3) and back adapter half (7) from sensor assembly (5).

4.

Remove two bosses (4) from front adapter half (3) and back adapter half (7) .

5.

Remove two pins (6) and (9) from front adapter half (3) and back adapter half (7). Discard pins if damaged.

6.

Remove two pins (2) from front adapter half (3). Discard pins if damaged.

086605-1

Change 5