TM 9-2350-277-20-6
REPLACE DRIVER’S DISPLAY MOUNTING BRACKET (DVE) — Continued
0866 02
2.
If removed, install dummy connector (7), four washers (8), and screws (1) on guide (2).
NOTE
If installing driver’s display mounting bracket, do Steps 3 - 7.
If installing driver’s commander’s display (M58 only) mounting bracket, do Steps 8 - 12.
3.
Position three pads (3) on bulkhead and guide (2) with three clamps (4), new lockwashers (5), and screws (6).
.
0866 02-6
Change 5