TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 821 of 871

TM 9-2350-277-34

REPLACE LOCKED-IN STUDS (M577A3 ONLY) — Continued

0117 00

4.

If stud cannot be turned by hand, lock two jamnuts on nut end of stud. Then turn with a wrench.

NOTE

See Table 1, page 0117 00-3 for correct nut thread size.

5.

Remove jamnuts.

6.

If stud with serrated lockring is to be installed, place lockring on stud.

7.

Cut off a piece of heavy walled pipe or tubing to ﬁt over stud as shown Step 8. See (WP 0121 00) for fabrication

instructions.

0117 00-2

Change 1