TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 815 of 871

TM 9-2350-277-34

REPAIR FAN AND GENERATOR VARIABLE SPEED DRIVE (OLD

CONFIGURATION) — Continued

0115 00

25. Install new encased oil seal (1) in cover plate (2).

26. Pump oil through lower oil passage (3) until rear housing (4) is full.

27. Lubricate new preformed packing (5) and install on cover plate (2). Install cover plate (2) on rear housing (4).

28. Install six screws (6) and washers (7) to secure cover plate (2). TIGHTEN SCREWS TO 100-105 LB-IN (11-12 N·m)

TORQUE.

29. Install protective plugs in three rear ports.

30. Reverse housing assembly (8).

31. Install fan pulley (3) on housing assembly (8). Secure pulley with six screws (6) and washers (7). TIGHTEN SCREWS

TO 210-220 LB-IN (24-25 N·m) TORQUE.

0115 00-12

Change 2