TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 814 of 871

TM 9-2350-277-34

REPAIR FAN AND GENERATOR VARIABLE SPEED DRIVE (OLD

CONFIGURATION) — Continued

0115 00

21. Install new gasket (5) on rear housing (4).

22. Using.020-inch (.5-mm) shim stock and two 2-inch (51-mm) diameter hose clamps, compress three new rings on shaft.

Allow to seat for thirty minutes. Remove both clamps and shim stock.

23. Install front housing (3) on rear housing (4).

24. Install six screws (1) and washers (2) to secure front housing (3) to rear housing (4). TIGHTEN SCREWS TO 210-220

LB-IN (24-25 N·m) TORQUE.

0115 00-11

Change 2