TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 813 of 871

TM 9-2350-277-34

REPAIR FAN AND GENERATOR VARIABLE SPEED DRIVE (OLD

CONFIGURATION) — Continued

0115 00

13. Aline ring tabs (3) on clutch assembly (4) before installing shaft in housing (5).

14. Press shaft and clutch assembly (4) into inner housing (5).

15. Lightly lubricate both outer bearing races.

16. Support front housing (6) only during installation of inner housing (7) on arbor press to allow inner housing to extend

down past front housing edge.

17. Press inner housing (8) (with clutch and shaft) into the front housing (6).

18. Install large lock ring (9) that secures the inner housing (8) to the front housing (6).

19. Lubricate new encased oil seal (10).

20. Install new encased oil seal (10) into front housing (6). Use brass drift and hammer.

0115 00-10

Change 2