TM-9-2350-277-34
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
TM-9-2350-277-34 - Page 84 of 871
TM 9-2350-277-34
NO DC OUTPUT FROM DC POWER SUPPLY (M1068A3 ONLY) — Continued
0009 00
Y
1.
Connect special purpose power cable (1) to external AC power
and to J24 (2) on power control enclosure (3).
2.
Remove circuit 31D (4) and circuit 32D (5) from power
supply PS2 (6) and power supply PS1 (7).
3.
Apply external AC power and set AC MAIN and DC POWER
SUPPLY switches to ON. See TM 11-7010-256-12&P.
4.
Measure voltage between OUTPUT (+) terminal (8) and
OUTPUT (-) terminal (9) on power supply PS1 (7).
5.
Does multimeter read 26.4 volts DC or more?
YN
1.
Replace power supply PS1
(WP 0090 00).
2.
Verify no faults found.
000900-3
Change 4
Back to Top
