TM9-2350-311-20-1
4 Remove spring pin (11). Discard spring pin.
5 Remove four screws (12), four flat washers (13), upper slide (14), lower slide (15), and shims (16).
6 Remove inside and outside handle assemblies (17) with components.
b. Installation
1 Install inside and outside handle assemblies (17) with components.
2 Install shims (16), lower slide (15), upper slide (14), four flat washers (13), and four screws (12).
3 Install new spring pin (11).
4 Install rod assembly (10), new preformed packing (9), flat washer (8), and new self-locking nut (7).
5 Install headed pin (6) and new cotter pin (5).
6 Install bracket (4), two flat washers (3), two screws (2), and pin (1).
11-43