TM 9-2350-311-20-1
4-5 POWERPLANT — CONTINUED
d. Test Run — Continued
3
4
5
6
7
Ensure transmission is in neutral position or injury to personnel could occur.
From inside driver’s compartment, place transmission in N (neutral) position.
Pull transmission shift linkage (175) forward all the way. Push transmission shift linkage back two clicks to shift
into neutral.
Turn MASTER switch (176) ON.
Hold FUEL PRIME switch (177) to ON for 1 minute, then release.
Push and hold engine STARTER switch (178) to START until powerplant starts.
4-38
WARNIN G