TM 9-2350-311-20-1
Ensure MASTER switch is OFF before disconnecting electrical connectors of
power cable assemblies. Failure to follow this warning can result in injury to
personnel.
Allow powerplant to cool off before removing special equipment. Hot components
can cause severe burns.
4 Disconnect battery ground cables (para 8-28).
5 Remove screw (166), two Iockwashers (167), and ground cable assembly (item 7, Appx H) (165) from vehicle
hull. Discard Iockwashers.
6 Remove screw (89), two Iockwashers (90), and ground cable (item 7, Appx H) (165) from transmission. Insta
Iockwashers and screw.
7 Install powerplant ground cable (91), two new Iockwashers (167), and screw (166) on vehicle hull.
4-4