TM-9-2350-311-20-1

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS

AUGUST 1994

TM-9-2350-311-20-1 - Page 711 of 1275

TM 9-2350-311 -20-1

8-25 SERVICE AND BLACKOUT TAILLIGHTS, STOP LIGHTS, AND LAMPS

This task covers:

a. Removal

b. Installation

General mechanic’s tool kit (item 64, Appx H)

Parts

Antiseize compound (item 8, Appx D)

Lockwashers (4) (item 96, Appx G)

Preformed packing (item 197, Appx G)

Silicone compound (item 18, Appx D)

a. Removal

1

2

3

4

WARNING

Ensure MASTER switch is OFF when working on light to avoid electrical shock and

burns.

NOTE

Steps 1 thru 8 are for removal of service taillight; steps 9 thru 16 are for removal of

B.O. taillights.

Taillight does not need to be removed from vehicle to replace LEDs.

Remove two screws (1), cover plate (2), and two spacers (3) from inside hull.

Disconnect three electrical connectors (4).

Remove two screws (5), two Iockwashers (6), and two flat washers (7) from inside hull. Discard Iockwashers.

Remove taillight assembly (8), grommet (9), and electrical leads (10) from outside hull.

8-66

Tools

Materials/