TM-9-2350-311-34-1

HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-1 - Page 118 of 352

TM9-2350-311-34-1

Tools

INITIAL SETUP

References

5-6 FUEL TANK HEAT SHIELD

This task covers:

a. Inspection and Repair

General mechanic’s tool kit (item 14, Appx C)

TM 9-2350-311-20-1

TM 9-237

a. Inspection and Repair

1

2

3

4

5

6

7

Check fuel tank heat shield seals (1) for tearing or deterioration. Replace as required (TM 9-2350-311-20-1).

Check supports for cracks or damage. Weld to repair or replace as required (TM 9-237).

Check retainers for cracks, damage, or bent areas. Weld to repair, straighten, or replace as required (TM 9-

2350-311-20-1).

Check for stripped threads on retainer studs. Drill out and replace welded studs or retainer as required (TM 9-

2350-311-20-1).

Check insulation. Replace if deteriorated or burnt (TM 9-2350-311-20-1).

Check heat shield body for cracks or broken welds. Weld to repair or replace as required (TM 9-2350-311-

20-1).

Check pad (2) for deterioration. Fabricate new pad if required (item 3, Appx D).

5-36