NOTE
7-27
TM 9-2350-311-34-1
7 Install four snap-in connectors (1 thru 4) to electric fuel pumps.
Powerplant must be removed to connect fuel pump leads (TM 9-2350-311-20-1).
8 Install two snap-in connectors (6 and 7), two guard leads (5), two washers (24), and two screws (23) to fuel
level transmitters.
NOTE
FOLLOW-ON MAINTENANCE:
Install engine compartment access cover
(TM 9-2350-311-20-1)
Install engine exhaust grille and front slope plate
(TM 9-2350-311-20-1)
Close air intake grille (TM 9-2350-311-20-1)
Connect batteries (TM 9-2350-311-20-1)