TM-9-2350-311-34-1

HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-1 - Page 170 of 352

TM 9-2350-311-34-1

7-9 BULKHEAD-TO-PORTABLE INSTRUMENT PANEL WIRING HARNESS

(ENGINE MODEL 7083-7396) – CONTINUED

d. Installation

1

2

3

4

5

6

Connect two connectors (19 and 22) at flame heater electrical lead (46).

Connect connector (17) at in-tank fuel pump lead assembly and connect connector (20) to “Y” connector-to-in-

tank fuel pump lead assembly.

Connect connector (9) to “Y” connector (44) and connect connector (21) to accessory control box-to-heater/

blower wiring harness (45).

Connect two connectors (15 and 16) to parking brake warning switch (39) at brake assembly (40).

Connect connector (11), connector ground (14), and connector (8) to master warning light (37) near driver’s

steering column (38).

Connect connector (13) to bulkhead at driver’s instrument panel wiring harness, connector (15) to parking

brake light, and connector (16) to wiring harness between driver’s instrument panel (36) and circuit breakers

(35).

7-34