TM-9-2350-311-34-2

CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-2 - Page 470 of 552

TM 9-2350-311-34-2

14-3 ACTUATOR ASSEMBLY

— CONTINUED

c. Assembly — Continued

5

6

7

8

9

Install shim(s) (22) and actuator cover (21).

Install six cap screws (20) and new lockwire (19).

Install two sleeve bearings (14) in access cover (11) and install on gearshaft (12). Position sleeve spacer (7)

on gearshaft to give 0.002 to 0.006 inch (0.05 to 0.15 mm) clearance between sleeve spacer and sleeve

bearing.

NOTE

If gearshaft is new, perform step 8. Otherwise, skip to step 9.

Drill spring pin (6) hole in gearshaft (12).

Install spring pin (6) in sleeve spacer (7).

14-10

Change 2