TM-9-2350-358-BD
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A6
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT SUPPORT MAINTENANCE
MARCH 1994
TM-9-2350-358-BD - Page 264 of 343
TM 9-2350-358-BD
12-12. ARMOR, PENETRATED - CONTINUED
6.
Weld additional stringer passes until weld is secure.
7.
Check for maximum allowable opening of 1/8-inch between patch and armor.
8.
Record the BDAR action taken.
When mission is complete, as soon as practical, repair the equipment/system
using standard maintenance procedures.
Option 2:
Large holes in armor.
Limitations:
Degraded armor protection.
Personnel/Time Required:
•
1 soldier
•
1.0 hour
Materials/Tools:
•
Paper abrasive (item 46, Appendix C) or wire brush
•
Polymer kit (found in M2/3 generic BDR kit, Section III, Appendix C)
•
Screw (scavenged from available source)
•
Nuts (scavenged from available source)
•
Flat washers (scavenged from available source)
Other Options:
Use fiberglass repair kit (item 50, Appendix C)
References:
TM 9-2350-314-20-2-2
12-12
Back to Top
