TM-9-2350-358-BD
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A6
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT SUPPORT MAINTENANCE
MARCH 1994
TM-9-2350-358-BD - Page 267 of 343
TM 9-2350-358-BD
12-11. ARMOR, PENETRATED - CONTINUED
References:
TM 9-2350-314-20-2-2
Other Options:
Use fiberglass repair kit (item 50, Appendix C)
Procedural Steps:
1.
Gain access to the damaged area.
2.
Clean area around damage.
NOTE
Bolts, nuts, washers, or rocks may be used as fillers depending on the size of the hole.
3.
Fill hole in armor with polymer.
4.
Wait for polymer to dry.
5.
Record the BDAR action taken.
When mission is complete, as soon as practical, repair the equipment/system
using standard maintenance procedures.
Option 5:
Holes in armor.
Limitations:
Degraded armor protection
Personnel/Time Required:
•
1 soldier
•
1.0 hour
Materials/Tools:
•
Paper, abrasive (item 46, Appendix C) or wire brush
•
Polymer kit (found in M2/3 generic BDR kit, Section III, Appendix C)
•
Screw (scavenged from available source)
12-15
Back to Top
