TM-9-2350-358-BD
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A6
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT SUPPORT MAINTENANCE
MARCH 1994
TM-9-2350-358-BD - Page 268 of 343
TM 9-2350-358-BD
12-11. ARMOR, PENETRATED - CONTINUED
•
Nuts (scavenged from available source)
•
Flat washers (scavenged from available source)
References:
TM 9-2350-314-20-2-2
Other Options:
Use fiberglass repair kit (Item 50, Appendix C)
Procedural Steps:
1.
Gain access to the damaged area.
2.
Clean area around damage.
3.
Insert screw with flat washer Into hole in armor.
4
Install a flat washer and nut onto the screw from inside the vehicle.
5
Spread polymer over the head of the screw and flat washer on the outside and over the nut and flat washer on the
inside.
6
Allow polymer to dry.
7
Record the BDAR action taken.
When mission is complete, as soon as practical, repair the equipment/system
using standard maintenance procedures.
SECTION VI.
TRAVERSE MECHANISM
12-12. GENERAL
In the event the traversing mechanism becomes so damaged that it is impossible to traverse either under power or
manually, the gun may be layed by repositioning vehicle.
12-16
Back to Top
