TM-9-2350-358-BD
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A6
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT SUPPORT MAINTENANCE
MARCH 1994
TM-9-2350-358-BD - Page 265 of 343
TM 9-2350-358-BD
12-11. ARMOR, PENETRATED - CONTINUED
Procedural Steps:
1.
Gain access to the damaged area.
2.
Clean damaged area allow a 2 inch lip.
NOTE
Rocks, mud, or other substances or materials may be used as fillers.
3.
Fill hole with a mixture of the polymer kit (follow kit instructions).
Use bolts, nuts, and washers as filler.
5.
Record the BDAR action taken.
When mission is complete, as soon as practical, repair the equipment/system
using standard maintenance procedures.
Option 3:
Small holes in armor.
Limitations:
Degraded armor protection.
Personnel/Time Required:
•
1 soldier
•
1.0 hour
Materials/Tools:
•
Paper abrasive (item 46, Appendix C) or wire brush
•
Bolts, nuts and flat washers (scavenged from available source)
•
Polymer kit (found in M2/3 generic BDR kit, Section III, Appendix C)
Other Options:
Use fiberglass repair kit (item 50, Appendix C)
12-13
Back to Top
