TM-9-2350-358-BD
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A6
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT SUPPORT MAINTENANCE
MARCH 1994
TM-9-2350-358-BD - Page 90 of 343
TM 9-2350-358-BD
3-34.
ENGINE/TRANSMISSION HOUSING, DAMAGED - CONTINUED
WARNING
Adhesives, solvents, and sealing compounds can burn
easily, can give off harmful vapors, and are harmful to
skin and clothing.
To avoid injury or death, keep away
from open fire and use in well-ventilated area.
If
adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
3.
Cover damaged area and 1/4-inch or more of surrounding area with sealing compound.
NOTE
•
Allow
sealing
compound
to
harden.
•
If available, a heat lamp or other
electrical light may be projected
onto sealing compound to speed
hardening.
4.
Return oil to housing.
5.
Record BDAR action taken.
When mission is complete, as soon as practical, repair the equipment/system using
standard maintenance procedures.
Option 4
Limitations:
Frequent oil level checks must be performed after repair.
Personnel/Time Required:
•
1 soldier
•
Time to be determined by location and amount of damage.
Materials/Tools:
•
Sealing compound (item 55, Appendix C)
•
Plate stock (scavenge from available source)
•
Paper, abrasive (item 46, Appendix C)
References:
•
LO 9-2350-314-12
•
TM 9-2350-314-20-1-1
•
TM 9-2350-314-20-1-2
•
TM 9-2350-314-34-1
•
TM 9-2320-234-35
3-45
Back to Top
