TM-9-2350-358-BD
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A6
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT SUPPORT MAINTENANCE
MARCH 1994
TM-9-2350-358-BD - Page 86 of 343
TM 9-2350-358-BD
3-32.
BATTERY TERMINAL POST, BROKEN - CONTINUED
2.
Install tapping screw into battery terminal post stub.
3.
Connect negative battery clamp.
4.
Record BDAR action taken.
When mission is complete, as soon as practical, repair the equipment/system using
standard maintenance procedures.
Option 2
Limitations:
None
Personnel/Time Required:
•
1 soldier
•
1.0 hour
Materials/Tools:
•
Clamp, hose, 3/8 to 1 inch (item 7, Appendix C)
•
Hose, rubber or tubing, metal, 3/4 to 1 inch ID, 1 inch length (scavenge from available source)
•
Pig, lead (item 47, Appendix C)
•
Metal container (scavenge from available source)
Procedural Steps:
1.
Fabricate mold from 1 inch long, 3/4 to 1 inch ID rubber hose or metal tubing.
2.
Install mold around battery terminal post stub.
3.
Secure mold with hose clamp.
4.
Seal bottom of mold to battery with mud.
WARNING
Hot lead burns easily and can give off harmful vapors.
To avoid
injury or death, use in well-ventilated area.
5.
Melt lead into metal container.
6.
Pour molten lead into mold and allow to cool.
7.
Remove hose clamp, mold, and mud from battery and battery terminal post.
8.
Install battery post clamp.
9.
Record BDAR action taken.
When mission is complete, as soon as practical, repair the equipment/system using
standard maintenance procedures.
3-41
Back to Top
