TM 9-2510-247-13&P
0049 00
STROBE LIGHT MAINTENANCE
REMOVAL, INSTALLATION, REPAIR
INITIAL SETUP:
Equipment Conditions
Materials/Parts
• Fifth Wheel Towing Device in a convenient
• Bulb, halogen (4) (BH-1)
configuration.
• Washers, lock (3) (1229-S-513-C)
• Disconnect Batteries (WP 0050).
Tools/Test Equipment
General Safety Instructions
Tool Kit, Mechanics General,
Remove all power to towing device prior to
making any repairs on electrical system.
REMOVAL
WARNING
Remove all power to towing device prior to making any repairs
on the electrical system.
Failure to do so may result in serious
injury or death to personnel.
NOTE
Both strobe light assemblies are removed the same way. Left side shown.
1.
Remove four screws (1) from cover (2). Remove cover (2) from baseplate (3).
2.
Disconnect strobe light wire (4).
0049 00-1
Figure 91.
Strobe Light Assembly