TM-9-2510-247-13-P

FIFTH WHEEL TOWING DEVICE MODEL 250M

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL, REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2004

TM-9-2510-247-13-P - Page 240 of 522

TM 9-2510-247-13&P

0049 00

REMOVAL

NOTE

Perform step 3 ONLY IF strobe light assembly is damaged.

3. Remove four screws (5) from base plate mounting brackets (6). Remove strobe light

assembly from mounting brackets.

NOTE

Perform step 4 ONLY IF mounting bracket is damaged.

4. Remove three screws (7) and lockwashers (8) from mounting bracket (9). Remove mounting

bracket (9) from mast assembly. Discard lockwashers.

NOTE

DO NOT touch bulb with bare hands. Body oil may shorten

the operating life of the bulb.

Use gloves (item 6, Appendix F) or a rag (item 10, WP 0085)

when handling bulbs.

BULB REMOVAL

1. Remove four screws (1) from cover (2). Remove cover from base plate (3).

2. Remove bulb securing clip (10) and bulb (11).

BULB INSTALLATION

1. Install bulb (11) and secure with bulb securing clip (10).

2. Position cover (2) on base plate (3) and secure with four screws (1).

0049 00-2

Figure 91.

Strobe Light Assembly