TM-9-2510-247-13-P

FIFTH WHEEL TOWING DEVICE MODEL 250M

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL, REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2004

TM-9-2510-247-13-P - Page 248 of 522

TM 9-2510-247-13&P

0051 00

REMOVAL

Remove screw (1) and washer (2) from loop clamp (3). Remove loop clamp from wiring harness.

REPLACEMENT/REPAIR

Wiring harnesses are not ordinarily removed except if they need to be replaced. Badly damaged wiring

harnesses must be replaced.

Wiring harness connections must be tightly attached and connected. See

wiring schematics (WP 0088) for additional information.

INSTALLATION

Position loop clamp (3) around wiring harness and secure with screw (1) and washer (2).

Figure 96.

Loop Clamp

Follow-on Tasks:

Check electrical system for proper operation.