TM-9-2510-247-13-P

FIFTH WHEEL TOWING DEVICE MODEL 250M

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL, REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2004
TM-9-2510-247-13-P

  TM-9-2510-247-13-P - Page 247 of 522

TM 9-2510-247-13&P
0051 00
WIRING HARNESS/CABLE MAINTENANCE
REMOVAL, REPLACEMENT, REPAIR, INSTALLATION
INITIAL SETUP:
Equipment Conditions
Materials/Parts
• Parked on level ground.
Tie, plastic (item 19, WP 0085)
Tools/Test Equipment
General Safety Instructions
•
Tool Kit, Mechanics General,
Remove all power to towing device prior to
making any repairs on the electrical system.
•
Shop Equipment, Common Set No. 1,
WARNING
Remove all power to fifth wheel towing device prior to making any
repairs on the electrical system. Failure to do so may result in serious
injury or death.
NOTE
Wiring harnesses can be replaced or repaired depending on the type of
damage. Broken wires can be spliced and sealed with heat shrink tubing
or electrical tape.
See WP 0038 00-6 (tagging wires and hoses), WP 0038 00-7 (soldering),
WP 0038 00-7 (heat shrinkable tubing), and WP 0038 00-8 (electrical
ground points) for general wiring harness maintenance instructions.
There are three loop clamps securing the wiring harnesses.
0051 00-1


Back to Top