TM-9-2510-247-13-P

FIFTH WHEEL TOWING DEVICE MODEL 250M

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL, REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2004

TM-9-2510-247-13-P - Page 241 of 522

TM 9-2510-247-13&P

0049 00

INSTALLATION

NOTE

Both strobe light assemblies are installed the same way.

Left side shown.

Perform step 1 ONLY IF mounting bracket was removed.

1. Feed strobe light wire (4) through mounting bracket (9). Position mounting bracket (9) on mast

assembly and secure with three screws (7) and new lockwashers (8).

NOTE

Perform step 2 ONLY IF strobe light assembly was removed.

2. Position strobe light assembly on base plate mounting brackets (6) and secure with four

screws (5).

3. Connect strobe light wire.

4. Position cover (2) on baseplate (3) and secure with four screws (1).

0049 00-3