TM-9-2520-215-34
CROSS-DRIVE TRANSMISSION ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 2005
TM-9-2520-215-34 - Page 106 of 508
TM 9--2520--215--34
0021 00--4
ADJUSTING DRIVE SHAFT PRELOAD – CONTINUED
0021 00
ADJUSTING DRIVE SHAFT PRELOAD – Continued
7. Recheck torque required to rotate drive shaft (3) slowly. If torque does not exceed free--rolling torque by 15 lb--in
(1.7 N
S
m), back spanner nut off to next closest locking position. (Do not install lockring in the spanner at this
time.)
3
END OF WORK PACKAGE
Back to Top
