TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 168 of 508

TM 9--2520--215--34

0037 00--2

BRAKE AIR VALVE ASSEMBLY AND RELATED LINKAGE REPAIR –

CONTINUED

0037 00

DISASSEMBLY – Continued

NOTE

Step 2 must be done to prevent the key at the air valve assembly end from damaging the oil

seal when shaft is removed.

2. Place air valve linkage shaft (4) in a vise with soft jaws and, using a small drift and hammer, remove oil seal (11)

and retainer (12). Discard oil seal.

11

12

4

NOTE

Do not disassemble brake air valve assembly. If parts replacement is necessary, replace

entire valve assembly.

3. Remove brake air valve linkage shaft (4) and brake air valve assembly (10) from brake air valve body (13).

Remove key (14), retainer (12), and oil seal (11) from shaft (4). Discard oil seal.

10

13

12

11

14

4