TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 175 of 508

TM 9--2520--215--34

STEER CLUTCH HOUSING ASSEMBLY REPLACEMENT – CONTINUED

0038 00

INSTALLATION – Continued

NOTE

Mounting bolts securing the left steer clutch housing assembly are tightened to 32 to 38 lb--ft

torque (43.4 to 51.5 N

S

m). Mounting bolts securing the right steer clutch assembly are

torqued to 67 to 80 lb--ft (90.9 to 108.5 N

S

m)

2. Install two

½

--13 x 3 --1/4 bolts (1) three

½

--13 x 2 -- 3/4 bolts (1), and install 14 remaining bolts (1), and 18 new

lockwashers (2) into right steer--clutch housing (3). Torque mounting bolts to 67 to 80 lb--ft (90.9 to 108.5 N

S

m)

1

2

3

1

2

1

2

NOTE

FOLLOW--ON MAINTENANCE:

Install inspection plate and gasket

(WP 0036 00)

Install steer control valve assembly

(WP 0026 00)

END OF WORK PACKAGE

0038 00--3/4 blank