TM-9-2520-215-34
CROSS-DRIVE TRANSMISSION ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 2005
TM-9-2520-215-34 - Page 177 of 508
TM 9--2520--215--34
0039 00--1
STEER CLUTCH HOUSING ASSEMBLY REPAIR
0039 00
THIS WORK PACKAGE COVERS:
Disassembly, Cleaning, Inspection, Fit and Wear Limits, Assembly
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0088 00)
Electric hand drill (item 30, WP 0088 00)
Drill set twist (item 31, WP 0088 00)
Arbor press, hand (item 20, WP 0088 00)
Eyebolt (item 25, WP 0088 00)
Hammer, hand (item 35, WP 0088 00)
Welder’s gloves (item 34, WP 0088 00)
Torque wrench (0--600 lb--ft) (item 26, WP 0088 00)
Torque wrench (0--175 lb--ft) (item 22, WP 0088 00)
Compressor assembly (item 3, WP 0088 00)
Materials/Parts
White lead (item 13, WP 0085 00)
Oil soluble grease (item 4, WP 0085 00)
Preformed packing (item 23, WP 0087 00)
Preformed packing (item 47, WP 0087 00)
Woodblock (item 6, WP 0085 00)
Preformed packing (item 24, WP 0087 00)
Retaining ring (item 41, WP 0087 00)
Seal assembly (item 4, WP 0087 00)
Material/Parts -- Continued
Dry ice
Petrolatum (item 9, WP 0085 00)
Retaining ring (item 25, WP 0087 00)
Retaining ring (item 7, WP 0087 00)
Retaining ring (item 9, WP 0087 00)
Seal (2) (item 20, WP 0087 00)
Self--locking bolt (32) (item 107, WP 0087 00)
Self--locking bolt (32) (item 112, WP 0087 00) (For left
steer clutch)
Dowel pin (item 5, WP 0087 00)
Pin (item 21, WP 0087 00)
Seal (item 76, WP 0087 00)
Self--locking bolt (2) (item 95, WP 0087 00)
Equipment Conditions
Steer clutch housing assembly removed from
transmission (WP 0038 00)
DISASSEMBLY
1. Remove snap ring (1) and output coupling (2). Remove hook type seal ring (3) from base of coupling. Discard
snap ring and seal ring.
2. Position steer clutch housing assembly (4) on wood blocks. Using a soft hammer or mallet, drive out planetary
carrier assembly (5). Approximately one inch downward movement will free the carrier assembly.
1
3
2
4
5
Back to Top
