TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 186 of 508

TM 9--2520--215--34

0039 00--10

STEER CLUTCH HOUSING ASSEMBLY REPAIR – CONTINUED

0039 00

DISASSEMBLY – Continued

NOTE

Do not remove dowel pin, tube assembly, and elbow unless replacement is necessary. Perform

Step 20 if replacement is necessary.

The following steps apply to the left hand steer clutch housing assembly.

20. Remove dowel pin (42), tube assembly (43), and elbow (44). Discard dowel pin.

21. Remove oil tube assembly (45) and elbows (46 and 47).

NOTE

Do not remove nut, oil transfer sleeve, and seal ring unless replacement is necessary. Perform

Step 22 if replacement is necessary.

22. Remove nut (48) by bending outer lip out of slot in sleeve (49) where it is staked.

23. Remove seal ring (50) from its groove in sleeve (49). Discard seal ring.

50

49

42

48

46

43

47

44

45