TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 179 of 508

TM 9--2520--215--34

0039 00--3

STEER CLUTCH HOUSING ASSEMBLY REPAIR – CONTINUED

0039 00

DISASSEMBLY – Continued

5. Remove compressor assembly and lift off steer tie shaft drive gear (8), steer clutch hub (11) and bearing (9).

Invert these parts, place on wood blocks. Using soft drift and ball peen hammer, drive out bearing (9) and

separate gear (8) and hub (11).

9

11

8

6. Remove spacer (12) from internal hub of steer clutch housing assembly (4). Remove 16 steer clutch plates (13

and 14).

4

12

13

14