TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 182 of 508

TM 9--2520--215--34

0039 00--6

STEER CLUTCH HOUSING ASSEMBLY REPAIR – CONTINUED

0039 00

DISASSEMBLY – Continued

11. Using two screws (15) which retained the clutch pressure plate, lift out apply ring assembly (22).

NOTE

Do not remove ball bearing unless replacement is necessary.

12. Remove spacer (25) from apply ring (22) assembly. Remove ball bearing (26). Remove seal ring (27) (hidden)

from groove in clutch piston (28). Remove expander (29). Remove preformed packing (30) from groove in apply

ring (22). Discard preformed packing and seal ring.

22

30

15

29

28

26

25

27

13. Remove hook type seal ring (31) from housing (4) hub. Discard seal ring.

4

31