TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 193 of 508

TM 9--2520--215--34

0039 00--17

STEER CLUTCH HOUSING ASSEMBLY REPAIR – CONTINUED

0039 00

ASSEMBLY – Continued

18. Install new preformed packing (30) in outer grooves of steer clutch apply ring (22).

30

22

19. Install expander (29) into piston (28) groove. Install new Teflon seal ring (27) carefully on top of expander (29).

Place a portion of seal in steer clutch piston ring (28) groove. Work remainder of seal in ring groove.

CAUTION

Use care to prevent seal from popping out of piston ring groove.

20. Before installing piston (28) and new Teflon seal ring (27) assembly, coat new Teflon seal ring (27) with

petrolatum, technical, then work steer clutch piston (28) and seal ring (27) into bore.

28

29

27