TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 196 of 508

TM 9--2520--215--34

0039 00--20

STEER CLUTCH HOUSING ASSEMBLY REPAIR – CONTINUED

0039 00

ASSEMBLY – Continued

25. Using two 5/16--24 flat head screws to grip apply ring (22) assembly, install apply ring assembly (22), seal ring

side up, onto inner hub of housing (4). Install spacer (25) onto bearing (26) of apply ring assembly (22).

22

25

4

26

26. Install four Belleville springs (24), beginning by installing first one convex side down. Install the second spring

concave side down; the third one, convex side down; and fourth one, concave side down. Install spacer (23) onto

Belleville spring (24).

24

23