TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005
TM-9-2520-215-34

  TM-9-2520-215-34 - Page 205 of 508

TM 9--2520--215--34
0040 00--3
OUTPUT REDUCTION GEAR BRAKE APPLY REACTION PLATE
REPLACEMENT – CONTINUED
0040 00
INSTALLATION
1. Install output reduction gear brake apply reaction plate (7) into brake housing (9). Align two ports (10) with
notches.
2. Install retainer plate (8), aligning holes with holes in output reduction gear brake apply plate (7). Install 27 new
self--locking bolts (1 and 5) into all holes except two (11).


Back to Top