TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 212 of 508

TM 9--2520--215--34

0041 00--6

BRAKE APPLY REACTION PLATES AND RELATED PARTS REPAIR –

CONTINUED

0041 00

ASSEMBLY – Continued

10. Install spacer (2) and new snap ring (1). Spacer has internal notch which must engage dowel pin in brake apply

shaft (3).

11. Install new hook--type seal ring (14) into groove on hub of sleeve (15).

12. Install new preformed packing (19) into outer groove of saddle (12).

1

2

12

3

14

19

15

NOTE

FOLLOW--ON MAINTENANCE:

Install output reduction unit

(TM 9--2350--256--20)

END OF WORK PACKAGE